Back to the archive
Public document · Public Services

ACCESSORY BUILDING (Detached) – PROJECT GUIDE

Public source material preserved in the Field Guide. Consult the original for authoritative wording and current status.

Source text

ACCESSORY BUILDING (Detached) – PROJECT GUIDE

<u>Applicant & Designer:</u> The following guideline will assist in preparing a complete application, and refers to required drawings based on project type, from the Town of Smiths Falls Building By-Law.

<u>Note:</u> If proposed building is freestanding, less than 24” to grade and less than 107 square feet without service systems; A permit may not be required; but zoning standards must be adhered to.

<u>Zoning Facts:</u> Min. 1.0 metre (3’-4”) for side/rear yard setback; Min. 2 metres (6’-7”) to building; Max. 4.5m (14’-9”) height grade to mid-level roof (eaves to ridge); Max.10% lot coverage of all accessory.

Ø <u>Designer;</u> <u>Prepare</u> <u>Two (2) Full Sets of Working Drawings</u> <u>dimensioned, detailed to scale:</u>

Building Location Plan; to meet Town Zoning By-Law & any other related approvals:

a) <u>Property Site Plan</u>; Overall lot dimensions/area, north, proposed building (incl. decks) located by lot line setbacks, existing structures, streets/entry/parking, services, utilities, easement, etc. Note: If available, always provide a Land Survey of record in reference.

b) <u>Lot Grading Plan</u>; Proposed grade elevations at building corners to adjacent properties, direction of surface storm water and swales. Existing drainage patterns and ditches.

c) <u>Note:</u> Copy of Ontario Land Survey may be required for any lot specific condition.

Architectural-Structural Design; to meet the Ontario Building Code:

d) Foundation Plan; Footing size, depth below grade, concrete pad and anchorage detail;

e) Floor Plan; Dimension framed walls/openings, post/beam size supports and roof frame;

f) Upper Floor Plan (if any); Provide stair access, room use and roof framing or truss plan;

g) Building Elevations; Illustrate proposed grade, overall height of building, finish materials;

h) Building Cross-section Detail; Provide means of anchoring building to foundation/grade, concrete slab design, thickness, slope and the overall height of building; and

i) Designer to complete form ‘Schedule 1: Designer Information’ (or Owner if Designer)

Pre-Fabricated Structural Design; Roof Truss layout-specifications by supplier. (if applicable)

Engineer Design; Accessory building over 55 sqm. (592sq.ft.) with a ‘slab-on-grade’ foundation proposed is subject to Engineer approval. Where design not as per the Ontario Building Code.

Ø <u>Applicant:</u> <u>File form</u> <u>‘Application for a Permit to Construct’</u> <u>with above drawings</u>;

-If Agent signs application; Owner to authorize agent to act on their behalf (ie. consent letter);

<u>On ‘Section A. Project Information’ of the application form</u>; calculate total,

  • Area of Work (Square Feet) as the Gross Building Area

  • Project Value ($) for all Labour, Materials, Services & Equipment to complete the project.

  • Permit Fee initial payment by debit/cheque/cash as per Building By-Law Schedule of Fees.

<u>Note:</u> This is a general list only for average project; Other information may be required. 10/20


Town of Smiths Falls 77 Beckwith St. N. Smiths Falls, ON, K7A 4T6 (613)-283-4124 Fax – (613)-283-4764


3